|
Contact Info :
PH: (800) 562-9840
FAX: (323) 771-3782
sales@acecrane.com
Physical Address:
Ace Crane Service, Inc.
8221 Wilcox Ave
PO Box 1129
Cudahy, CA 90201
|
News Update
|
|
|
|
|
| Battery Powered Lifting Magnets |
View Enlarged Image
|
Walker Battery Powered Lift Magnets - Flat Materials Handling
Walker Lift Magnets are compact, mobile, self-contained battery powered units. Operating on their own power sources, they are free of restricting cords and wires and have the further advantage of being usable in areas where electric power is not available. The WBM-13 is a new, compact model for general utility lifting. The WBM-36 has a special shoe design for plate lifting, but it has almost universal capability. WBM-13, WBM-25 and WBM-36 are all single units. The WBM-50 is two magnets on an adjustable spreader beam operated from a single battery pack.
- Dual push button release
- Clip allows operator to attach to belt or pocket
- Single push button lift
- Additional remote control units available at nominal cost.
- Pocket for IR Remote Transmitter (1 transmitter included with price of magnet)
- Removable cover allows inspection of battery.
- Temperature compensated: built-in automatic cut-off charger prevents over-charging of battery.
- For safety, magnet can not be turned "ON" if battery charge is too low.
- Interlock prevents magnet de-energization when suspended in air.
- Audible Warning Alarm and flashing light indicate low battery
- Lighted display indicates battery charge level.
- 110V AC cord and plug for built-in battery charger
- Uses "Deep Discharge" type low maintenance Gel Cell Battery.
- Meets all the requirements of ANSI/ASME B30.20 (safety standard).
- Supplied with manual, pull test certificate, video, and safety poster.
- Batteries are not included in price. Please contact our sales department.
|
|
|
Rating on RISI 1020 Steel |
Weight |
Headroom |
Length |
Width |
Part # |
Your Price |
|
|
|
|
| Walker WBP Series |
View Enlarged Image
|
Walker Battery Powered Magnets for Flat, Rounds, & Shapes
The special feature of this Battery Bi-Polar Magnet is the unique design of
pole shoe, which enables it to handle a wide variety of structural shapes and
rounds.
WBP-7 and WBP-15 lifting magnets are ideal for loads with a thickness of 1/4"
or greater and diameters between 1 inch and 12 inches.
Powered by its own battery, it is free of restricting cords and wires, and
can also operate in areas where electric power is not readily accessible.
Recommended Applications
This unique magnet is
ideally suited for handling pipe, tubing, bar stock, billets, I beams, H beams,
angles, channels, Tees, Zees, and pilings. Although specially designed to handle
structural shapes and rounds, the Bi-Polar configuration also lifts plate,
forgings, and castings.
Batteries not included.
*One IR Remote Transmitter Supplied with each WBM - WBP Magnet
- Dual push button release
- Clip allows operator to attach to belt or pocket
- Single push button lift
- Additional remote control units available at nominal cost.
|
|
|
Capacity (Flat) |
Capacity (Round) |
Weight |
Headroom |
Length |
Width |
Part # |
Your Price |
|
|
|
|
|
|
){kind=link}
){kind=link}